Cellular Polycarbonate - Modular Systems
AK 13 - Cellular polycarbonate system. Solution for roofs
We present the new AK 13 roof module that allows you to achieve greater lights with a simple, fast and economical installation. Our AK 13 modular system is especially suitable for small roofs, canopies and vaulted skylights, with an upper connector system made of cellular polycarbonate, which gives the cover its characteristic transparency and ease of assembly. The system consists of polycarbonate panels, with a honeycomb structure with multiple honeycomb layers. Joints with a pressure connection profile also made of polycarbonate.
The system is completed with the accessories for attachment to the structure and the perimeter edge. This system is characterized by a uniform bottom surface. Which allows the assembly of covers without the need to drill polycarbonate panels, the best guarantee against water infiltration. It is the ideal solution for small flat or vaulted roof applications. It is easy to install, since the connection between the two panels is made with a polycarbonate connection profile, which becomes the main feature of this system, providing it with great luminosity.
MAIN FEATURES:
-Transparency
-Thermal insulation
-Easy and quick assembly
-Perfect joint waterproofing
-Security anchoring of the panels
ELEMENTS THAT MAKE UP THE SYSTEM:
Extruded polycarbonate outer wall panels reinforced with UV protection: - Thickness: 10/12 mm; - Modular width: 600 mm-
Colours: transparent/ opal.
Polycarbonate upper profiles: UV protected by the joining of the panels Profiles and caps to close the ends panels and connectors.
Staples/Brackets for attachment to the structure
FEATURES AND MAINTENANCE
The panels are protected against UV rays on the outer side. A 10-year warranty is included against yellow and weather damage (hail, etc.) With regard to the reaction to fire, the panels are classified in Euroclasses EN 13501-1 as class BS1d0.
The panels should not be stored without adequate protection under the influence of the sun and the weather. It is recommended to clean the panels regularly to remove dirt due to dust and air pollution. The use of cold or warm water and (if necessary) neutral detergents is recommended. Avoid cleaning the surface if it is overheated by the sun.


























.jpg)


















